Ready to fly checklist

1. Board:

   • Inspect for any visible damage, cracks, or wear.
   • Ensure the deck grip is clean and free of residue.
   • Check that latches and hinges are functional; apply silicone-based lubricant if needed.
   • Rinse off any dust or dirt that may have accumulated and let it dry thoroughly.

2. Power Module:

   • Inspect the jet propulsion system for debris or corrosion.
   • Verify that all connections and cables are intact and free of damage.
   • Apply contact cleaner to electrical connections if necessary.
   • Check that the propeller or jet system spins freely without obstruction.

3. Battery:

   • Fully charge the battery before use.
   • Inspect for any physical damage, swelling, or signs of leakage.
   • Check the battery contacts and clean them if needed.
   • Ensure the waterproof seal is intact.
   • Monitor battery health and status on the JetWave app or remote controller.

4. Remote Control:

   • Fully charge the remote control.
   • Check all buttons, triggers, and the display for proper function.
   • Ensure the wireless connection to the board is working.
   • Verify that firmware is up to date (if applicable).

5. Wings:

   • Inspect wings for any damage, cracks, or sharp edges.
   • Ensure wing screws are tight and secure; reapply WD40 if needed.
   • Clean off any salt or dirt residue with fresh water, and dry them completely.

6. Overall System Check:

   • Ensure all components are properly assembled and securely attached.
   • Conduct a systems check by turning on the board and remote control.
   • Test the throttle response and ensure the motor runs smoothly before hitting the water.

By following this checklist, you can ensure your eFoil is ready for a safe and smooth ride after winter storage.